   |
500W EPS Power
1U Form Factor
250.00x100.00x40.50(mm) Price: $128.00 |
Features
• Complied with ATX, ATX12V and EPS12V standard
• Active Power Factor Correction (PFC) meet EN61000-3-2
• High efficiency and reliability
• Remote ON/OFF function
• Internal 12V DC fan included
• Noise Killer (thermal fan speed control function)
• Low noise and ripple
• Complies with FCC part 15 subpart J class B 115Vac operation,
and CISPR 22 class B at 230Vac operation
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950
or VDE EN60950, NEMKO EN60950 (CB Report), CE
Specifications
• Temperature Range: Operating: 0°C ~ +50°C on full load;
storage & shipping: -20°C ~ +80°C
• Humidity: 5 ~ 95% on operating and storage
• Dielectric Withstand: Input to frame ground 1800 VAC for 1 second
• Efficiency: 70% at minimum measured at nominal AC
115VAC with maximum load on all outputs
• Rise time: Less than 50ms
• Hold-up Time: 18ms minimum at nominal input voltage
• Power Good Signal: Power on delay time 100 ~ 500ms, off
delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Not exceed 3.5mA at 264Vac, 50Hz
• MTBF: 100,000 hours on maximum load at +25°C
• Dimensions (LxWxH): 250x100x40.5mm/10x4x1.6inch
Input Characteristics
• Input Range: 90 ~ 265Vac (RMS), Full Range Input
• Frequency: 47 ~ 63Hz
• Input Current: 9A (RMS) @115Vac, 5A (RMS) @230Vac
• Inrush Current: 80A Max @115Vac,120A Max @230Vac cold start